Hyundai ATF SP III: transmission oil for Korean automatic transmissions

Spread the love

This post is also available in: Русский (Russian) Français (French) Deutsch (German) Italiano (Italian) Español (Spanish)Spread the love Содержание скрыть.

This post is also available in: Русский (Russian) Français (French) Deutsch (German) Italiano (Italian) Español (Spanish)

Spread the love

Introduction

The minimum oil level must be maintained not only in the engine, but also in the gearbox and GUR. These technical components of the car, in turn, relate to the transmission unit. And their correct operation will preserve the dynamic characteristics of the car, initially set by the factory. Plus, timely oil change significantly reduces the wear of parts and, as a result, it will save you from expensive repairs of automatic transmission in the near future. However, in addition to carrying out timely maintenance, it is necessary to use a special high-quality oil. If you have a Korean car made by KIA or Hyundai, then the transmission oil of Hyundai ATF SP III is ideal for the gearbox of these brands.

Hyundai ATF SP III

Product description

The Hyundai ATF SP III oil consists of a mixture of essential oils, the key ingredient of which is the additive package. Due to this consistency, the ATP’s semi-synthetic oil has the optimal viscosity suitable for transmission systems. At the same time, the lubricant does not lose its functional properties at fairly low temperatures.

The use of Hyundai ATF oil prevents wear of automatic transmission mechanisms, and also provides soft gear shifting even at high temperatures. Hyundai ATF SP III oil is compatible for contact with parts made of any material, including metal and elastomer, due to which the transmission oil provides reliable protection against leaks.

Specifications

Hyundai ATF SP III oil is suitable for almost all multi-stage automatic transmissions belonging to the Hyundai and Kia brands.

The oil, intended for use in any technical hub of the car, has individual characteristics. Thus, the Hyundai ATF SP III transmission oil is characterized by the following parameters:

  • The oil is semi-synthetic in the type of lubricant;
  • SAE 80W viscosity level;
  • The viscosity ratio at 100 0C is 7.4;
  • density at 15 0C – 0.869kg/m3;
  • Crystallization temperature -33 0C;
  • The flash temperature in the open crucible is 210 0C.
  • the anti-nosed additive is boron.

The oil is packed in plastic canisters with volumes: 1 l, 4 l and 20 l.

Hyundai ATF SP-III oil articles

  • 0450000100 – 1 litre;
  • 0450000400 – 4 litres;
  • 0450000A00 – 20 liters.

Hyundai ATF tolerances

  • Mitsubishi DiaQueen ATF SP III;
  • Hyundai ATF SP III.

Application

Semi-synthetic oil Hyundai ATF SP III – one of the most popular products in the car market. In addition, Hyundai ATF transmission oil is the original lubricant for automatic transmissions of Korean cars produced at the Hyundai plant.

The oil is intended for use exclusively on Hyundai, Kia vehicles equipped with a four, five, or six-speed automatic transmission. It is worth noting that the automatic transmission of Hyundai cars are equipped with a Lock-Up Clutch system, which is a locking clutch. It also has increased requirements for the characteristics of the lubricants used. Therefore, in order to properly operate the automatic transmission, it is necessary to use only ATF type transmission fluid.

In addition, at the ATF transmission oil is produced with the established standards and requirements.

Conclusion

The original Hyundai ATF SP III transmission oil is a high-quality and high-tech product. Pouring semi-synthetic lubricant Hyundai in the automatic transmission, you can be sure of a long and continuous operation of the automatic transmission.

To determine the originality of the Hyundai ATF SP III oil, there are a couple of important aspects. First, the date of the spill is applied to the canister with a laser seal, which cannot be forged with a sticker made in the printing house. Secondly, the lid is equipped with a special skirt, which remains on the neck after the opening of the canister. Also, it is worth paying attention to the text of the label. It should be well readable and written without errors. Moreover, the label is difficult to unstuck, as its stickers use a special glue.

Therefore, it is important to use only original products, which are guaranteed to perform a lubricant function.

Leave a Reply

Your email address will not be published.